It is an acidic paint stripping compound used for removal of paint from the painted from ferrous and non-ferrous metals. It is recommended for removing paint from painted surfaces. Paint Stripper-AB can be used at elevated temperature and also at room temperature. After removal of paint, parts should be rinsed with water. Product Specifications
|
a.
|
Colour
|
Dark Brown Black Liquid
|
|
b.
|
Chemical Composition
|
Mixture of various strong acidic compounds, inhibitors etc.
|
|
c.
|
Odour
|
Slightly Pungent
|
|
d.
|
Foaming Tendency
|
Nil
|
|
e.
|
Reliability
|
Good
|
|
f.
|
Handling
|
Avoid Skin Contact
|
|
g.
|
Solubility
|
Good
|
|
h.
|
Toxicity
|
Moderate
|
|
I.
|
Toxicity
|
Nil
|
|
j.
|
Flash Point
|
Nil
|
|
k.
|
Pollution Hazard
|
oderate
|
Product Operating Data
|
Concentration
|
Cold Process
|
Hot Process
|
|
100%
|
100%
|
|
Pointage
|
R. T.
|
50 - 60c
|
|
Immersion Time
|
15 20 minutes
|
Within Few Minutes
|
|
Application
|
Dip Process
|
Dip Process
|
Product Operating Procedure.
Prepare the bath as given above. Wash the painted components with water to remove before dipping in Paint Stripper-AB bath. Dip the washed components in Paint Stripper-AB bath for 15 to 20 min, if bath is operated at R.T. In case bath is operated in hot stage then dip the components for few minutes till paint is removed. Rinse the components in running water to drag out the residue of Paint Stripper-AB chemical. While using the bath continuously for paint stripping, paint particles settles down in the form of sludge, which should be removed by cleaning the Paint Stripper-AB bath periodically. Product Application Equipments
The tank for Paint Stripper-AB bath may be constructed of mild steel with lining when using cold process. In hot process the equipment should be of stainless steel, stainless clad steel, lead lined steel or any other acid resistant material which can withstand the temperature of 60C, Paint Stripper-AB is acidic in nature. It is recommended that rubber gloves and goggles should be used by the operator. In case of emergency the antidote for the same in dilute solution of Ammonium chloride should be or consult the doctor immediately. Testing and Control Procedure
No testing is required Chemical Replenishment
Discard the bath when the paint removing efficiency slows down and make the bath fresh with 100% Paint Stripper-AB . Safety Measures
Paint Stripper-AB is based upon chlorinated base chemicals, mixture of acids and blend of different organic solvents. It is harmful if swallowed. Direct contact on skin can causes burns. Avoid prolonged breathing of vapours. Use of safety gloves, aprons, boots, eye shields, etc. during the stripping and handling is recommended for safe use.
|
